MCO-80IC-PE IncuSafe CO2 Reach-In Incubator

Large-scale cell culture CO2 Incubator

The IncuSafe MCO-80IC-PE is a large capacity, Reach-in CO2 Cell Culture Incubator, ideal for culturing large volumes of patient samples, performing short-term studies, and working with large volume cell culture apparatus. Superior contamination control with an antibacterial copper-alloy stainless interior that helps eliminate molds, spores and other contaminating spills, kills mycoplasma and provides a noncorrosive environment

Superior CO2 Recovery and Lower CO2 Consumption

The large capacity incubator was specifically designed for critical applications in pharmaceutical, biotechnology and clinical investigations.

Superior CO2, Temperature, and Contamination Control

  • CO2 range: 0 to 20%
  • Temperature range 5°C above ambient to 50°C
  • Effective capacity per chamber: 851 liters


>       Request a Quote



  • Passive Resistance To Mycoplasma
  • Integrated Core Technologies For Maximum Performance
  • Active Background Contamination Control  
  • IR Infrared CO2 System
  • SafeCell Active Background Contamination Control
  • InCu saFe Copper-Enriched Stainless Steel
  • Microprocessor Control System
  • Exceptionally low CO2 consumption rates, less than half of similar competitive units
  • Horizontal Laminar Airflow System promotes temperature uniformity
  • Forced air surrounding chamber allows uniform temperature distribution with no temperature gradients
  • Exceptional Contamination Control
  • inCu saFe copper-alloy-stainless interior, shelves and plenum
  • 851 liters capacity cabinet
  • Cabinet can accommodate a roller bottle apparatus, 5 bottles wide x 7 bottles high (requires mounting kit, MCO-80RBS)
  • Temperature uniformity
  • Forced air surrounding chamber
  • Cell Culture Protection Systems
  • Superior CO2 Recovery and Lower CO2 Consumption
  • Optional UV Sterilization and Humidity Control
  • Superior Contamination Control

Product Specification

External dimensions (W x D x H)986 x 853 x 2040 mm
Internal dimensions (W x D x H)806 x 693 x 1524 mm
volume851 litres
net weight275 kg
Technical Data 
Power supply230 V
Frequency50 Hz
Noise Level33 bD
Insulation materialPUF
Temperature sensorThermistor
CO2 sensorIR
O2 sensor 
Temp control range and fluctuationAmbient temp +5 to +50, (AT, 20C to 35C)
Temperature uniformity0.5 4)
CO2 control range and fluctuation0 ~ 20
O2 control range 
Humidity control range and fluctuationNormal mode, >80% R.H. High mode, > 90% R.H.
Light control range 
Power failure 
Out of temperature settingV-B-R
High temperatureV-B-R
Out of CO2 settingV-B-R
Out of humidity setting 
Door open 
Water level 
Exterior materialPainted steel
Colour (exterior)Bio-gray
Cabinet material (interior)SS copper alloyed
Outside lid/door1 double paned glass
Reversable door 
Inside lid/doorOption
Lid / outside door lock 
Max. load per shelf30
Max. total load150
Max. Shelf capacity 
Access port 
positionOne on each side
CO2 Incubator Contamination Control and Operating Systems 
H2O2 decontamination system (option 
SafeCell UV system (option) 
InCu saFe 
Water level sensor 
DHA heating systemN (laminar airflow)
CO2 incubator options 
Shelfs and brackets (InCu saFe)MCO-80ST-PW
Half tray 
Roller base 
CO2-gas pressure regulatorMCO-100L-PW
Automatic CO2 switchover systemMCO-80GC-PW
UV-system kitMCO-80UVS-PE
Inner door with 4 small doorsMCO-80ID-PW (5 small doors)
Stacking kit 
Digital interfaceMTR-480-PW
Analogue interfaceMCO-420MA-PW
Ethernet (LAN) 
H2O2 decontamination kit 
H2O2 vapour generator (requires MCO-HL-PE) 
H2O2 reagent pack of 6 bottles
Semiautomatic one point Gas calibration set 
Extra inner door 
Roller bottle rack mounting kitMCO-80RBS-PW
Automatic water supply system kitMCO-80AS-PW
>Professional Co2 and O2 Co2 Incubators brochure
>Instruction Manual MCO-80IC-PE
>IncuSafe CO2 Incubator MCO-80IC Product Sheet
>IncuSafe Incubators Customer Testimonial - The world’s first synthetic burger, University of Maastricht,NL

This is a testing block.

This is a testing block.